Alumina Ceramic Pipe Tube Introduction :
Chemshun alumina ceramic lined composite steel pipe not only has steel pipe characters of high-strength, good toughness, impact resistance, good weld-ability, but also has corundum ceramics characters of high hardness, high wear resistance, corrosion resistance, heat resistance which overcome disadvantages of steel low hardness, poor wear resistance and ceramics poor toughness, therefore, ceramic lined pipes have comprehensive property of excellent wear resistance, hear resistance, corrosion resistance, mechanical shock and thermal shock, etc. It is the ideal pipeline of conveying sand, stone, coal, ash, molten aluminum and so on particles and corrosive material. Chemshun Ceramics offers sophisticated design and engineering capabilities of both standard and custom wear linings, installation and project management, as well as abrasion audits of used wear linings.
1: Alumina Ceramic Pipe Application :
1)High temperature electrical insulators
2) Abrasion resistant tube and elbow liners
3)Furnace liner tubes
4)Protection tubes
5)Electrical stand off insulators
2: Application industry :
- Mining
- Mineral processing
- Power generation
- Cement
- Cement industry
- Coal washery
- Steel
- Defense (personal & vehicle armour )
3:Alumina ceramic content Available : Alumina content 92%, Alumina content 95%
4: chumshun pipe Size available:
| Chemshun ceramics offer ceramic pipe liner and ceramic pipe tile liner for pipe |
| Use ceramic pipe |
ID: 10mm~500mm |
Thickness and length according to customer's needs |
| Use pipe tile liner |
Any pipe size available |
Thickness : 13mm , 25mm, 50mm etc |
| Note: more sizes and customized size acceptable |
|
5: Ceramics property :
1) chemical properties :
| Al2O3 |
SiO2 |
CaO |
MgO |
NaO |
| 95%-96% |
2-3 |
1-1.5 |
0.3-0.6 |
0.02 |
2) Physical properties:
| Specific gravity (g/cc) |
3.65~3.75 |
| Apparent porosity (%) |
0.01 |
| Flexural Strength (20centi-degree, Mpa) |
275~300 |
| Compressive strength (20 centi-degree, Mpa) |
950~1100 |
| Rockwell hardness (HRA) |
85~88 |
| Vickers hardness (hv) |
1190~1220 |
| Moh's hardness (scale) |
9 |
| Thermal Expansion (20-800 centi-degree, x10-6/centi-degree) |
8 |
| Crystal Size (μm) |
1-2 |
){kind=link}