Wear Resistant Ceramic Elbow Pipe Lining for Ash Slurry Piping
Product Description
The ceramic elbow or ceramic sleeve sintered as a whole part, and then assemble it into the steel pipe with our high-strength-temperature-resistant epoxy adhesive.
Alumina ceramic tube , bend and elbow have exceptional hardness and strength, resistance to wear and chemical attack , It is especially used as the ceramic pipe liner of the pipeline and can protect the steel pipe for excessive wear and extend the use life . This kind of ceramic tube is easy for installation and diameter can be varied from 10mm to 500mm .Shape can be straight tube ,bend tube or Y-piece .with the properties of smooth surface , no gap and good abrasion and impact resistant ability . The ceramic pipe bending are widely used in the pipework of conveying ore fines. Cement , coal and other big hard materials in cement , steel , chemical , mining milling , smelting , port, thermal power plant, Its easy installation could reduce the cost much and meanwhile prolong the use life of the delivery system .
Feature
· Wear resistant
· Impact resistance
· Easy installation
· Short installation time
·
High hardness
·
Superior abrasion
·
Corrosion and chemical resistance
·
Light weight
·
Low maintenance cost: Super wear-resistance reduce the maintenance frequency and also the maintenance cost.
·
Good fluidity : Smooth surface ensure the free flow of material without blocking
Application
· Pipe lining
· Bend lining
· Elbow lining
· Conveying materials: ore fines, cement, coal, powder, slurry, etc
· Application fields: mining, cement plant, steel plant, thermal powder plant, port,etc.
Dimension
| Type |
ID (mm) |
OD (mm) |
Length (mm) |
Remark |
| Ceramic Tube |
45 |
60 |
50 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
51.5 |
64 |
50 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
62 |
77 |
50 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
65 |
85 |
92 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
79.5 |
96 |
50 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
80 |
100 |
300 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
97 |
117 |
300 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
100 |
120 |
300 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
102 |
120 |
300 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
125 |
145 |
300 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
135 |
155 |
300 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
150 |
170 |
300 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
150 |
175 |
300 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
| Ceramic Tube |
150 |
180 |
300 |
The Bend of Same ID and OD could be provided if provide the radius and bend degree |
Other size can be customized
Technical Data Sheet
| NO. |
Propertities |
Unit |
92% AL2O3 Series |
95% AL2O3 Series |
| 1 |
Al2O3 |
% |
92.00 |
95.00 |
| 2 |
Water Asorption |
% |
0.00 |
0.00 |
| 3 |
Density |
g/cm3 |
≥3.60 |
≥33.65 |
| 4 |
Flexural Strength |
Mpa |
270.00 |
320 |
| 5 |
Moh's Hardness |
Grade |
9 |
9 |
| 6 |
Rockwell Hardness |
HRA |
80.00 |
87 |
| 7 |
Vickers Hardness (HV10) |
Kg/mm2 |
1000 |
1200 |
| 8 |
Fracture Toughness |
Mpa.M1/2 |
3-4 |
3-4 |
| 9 |
Thermal Expansion Coefficient (25-1000ºC) |
1x10-6/ºC |
8.00 |
8.1 |
| 10 |
Max. Operation Temperature |
ºC |
1450 |
1500 |
Audited Supplier 
){kind=link}
){kind=link}