Wear Resistant Ceramic Dovetail Tile for High Temperature Operation
Weld-on dovetail ceramic tile liner is specially designed like the tail of swallow ..different from standard tiles , dove-tail ceramic tile is flat in side with groove and steel tile in another side , which is installed by welding with steel sheet. At the beginning steel card slot is welded into the equipment which need abrasion protection , at the same time . It is necessary to pay attention to the gap of steel card slot . Which makes the ceramic liner perfectly fit for the gap. Then along the steel card slot , install the dove-tail ceramic liner into the space of two steel card slot .chemshun weld-on dove-tail is mostly fit for dynamic operation equipment with high temperature working equipment .
We can make the irregular tile shape by cutting to suit different application field.
------Advantages:
Low wear loss and long working life.
Good impact resistance.
Good corrosion resistant
Good thermal shock resistance.
Smooth surface and good adherence resistance.
Quick installation and good service after sale.
Complicated shape and various size designed according to customers' demands.
---------Application:
-As alumina ceramic wear-resisting lining of coal-electing equipment on coal industry
-Cements industries;
-As wear resistant alumina ceramic lining of fall funnel, lining of wear-resisting pipe and bender,
-As wear resistant alumina ceramic liner of material tranfer pipe and chute, etc, on steel industry.
-As wear ceramic liner for l thansfer equipment;
-As Alumina ceramic wear plates Inside and outside surface of powder separating equipment on iron and steel works;
-Ceramics, mines and other grinding equipment lining;
-Parts of equipment hermal and power plants;
-Grinding systems Mixer Application areas
-Separator systems chain conveyor
-Cyclones diffusor
-sinter slurry ducts
-Hooper High temperature cyclones
-Ventilator housing salt plants
Common items equipment need wear resistant alumina ceramic linings are:
Agitators; Bends
; Branches; Chutes; Classifiers; Cones; Cyclones; Distribution Box; Ejectors; Fans; Feeders; HoppeCommon items equipment need wear resistant alumina ceramic linings are:
Agitators; Bendsr; Launders; Manifolds; Mills; Orifice; Pipes; Pipe Bends; Pipe fitting; Pulley lagging; Silos; Splitter Boxes; Spoons; Square Bends; Square to Round; Tanks; Troughs; Transfer points; T-Pieces; Y-Pieces etc.
----------Export countries:
-European countries: Germany,UK,Denmark,Turkey,Sweeden
-South American countries: Chile,Peru,Argentina,Colombia,Brazil
-Southeast Asia countries: India,Indonesia,Korea,Vietnam,Malaysia,
-Mainland:Taiwan
-Australia,
-USA,Canada
-South Africa
-----------Physical property :
| Item |
Content |
| Alumina content |
92% |
| Density |
≥3.62g/cm3 |
| Abrasion loss |
0.014cm3/10miuntes |
| Rockwell A Hardness |
≥87 HRA |
| Moh's Hardness |
9 grade |
| Impact strength |
≥850Mpa |
| Bending strength |
≥290Mpa |
| Thermal conductivity |
20W/m.k |
| Thermal expansion coefficient |
7.2*10-6/m.k |
| Water Absorption |
None |
| surface |
smooth, clear, pure white |
| Size |
normal size and custom-design can be supplied |
Audited Supplier 
){kind=link}
){kind=link}