Alumina Ceramic Pulley Lagging Tiles by Mosaic Tile Sheet
Company Description
Chemshun Ceramics manufactures kinds of ceramic lining pieces with salient point , which is widely applied for vulcanization in rubber. the combination of fine-grain alumina ceramic linings and a specially formulated rubber compound results in a dependable ceramic
rubber pulley lagging in conveying applications under extreme operating conditions.The high wear resistance of the embedded ceramic
cube in combination with an embossed contact surface ensures long-term maximum traction and elimination of belt slippage.
The dimples in ceramic cube greatly enhance the wear resistant property for rubber ceramic combination belt .
Pulley Laggings Ceramics Size :
| Ceramic lining pieces size |
| 17.5*17.5*5mm |
19.95*19.95*4.5*0.6 with dimples |
| 17.5*17.5*4mm |
20*30*5 with 18 pieces dimples |
| 17.5*17.5*3mm |
20*20*4 with 13 pieces dimples |
| 20*20*4/5/6mm |
20*20*8mm with 8 pieces dimples |
| 20820*12/13mm |
|
| 25*25*4mm |
|
| Note: more customized size available |
Technical Data Sheet
| Al2O3 |
SiO2 |
CaO |
MgO |
Na2O |
| 92~93% |
3~6% |
1~1.6% |
0.2~0.8% |
0.1% |
| Specific gravity (g/cc) |
>3.60 |
| Apparent porosity (%) |
0 |
| Flexural Strength (20ºC, Mpa) |
280 |
| Compressive strength (20ºC, Mpa) |
850 |
| Rockwell hardness (HRA) |
80 |
| Vickers hardness (hv) |
1050 |
| Moh's hardness (scale) |
≥9 |
| Thermal Expansion (20-800ºC, x10-6/ºC) |
8 |
| Crystal Size (μm) |
1.3~3.0 |
){kind=link}