Aluminium Oxide Ceramic Lining for Wear Resistant Solution
Hex tile mats as wear protection solution can be great solution to wear problems on curved , concave, or even convex surface . Which is combination of high hardness and chemical resistant ceramic hex tile and stickup silk, net and paper with special epoxy resin . Chemshun ceramics manufacturer offer size 6"*6" and 12" * 12" hex tile mats. When hexagonal tile mat application , it is necessary to evaluate wear damage area, hex tile mats thickness,installation adhesive .and some necessary tools . Hex tile mats is much different from ceramic tile brick , it is easy to repair and replace when someone hex tile wear out.
Due to the small size, Chemshun's mosaic tile is an ideal solution for lining high-wear areas as curved shape surfaces such as pipe, cones,etc. This provides the protection for applications where use of standard big tile is impractical.
The loose mosaic tiles are also usually used as wear liner embedded into rubber for hot vulcanization. this ceramic rubber liner combines the good performances of wear resistance of ceramic and anti-impact of rubber.so, it is also well required by mining industry.
1. Sample brief introduction
--Item:Alumina Ceramic square cube on adhesive sticker
--Sample size: 3mm square ceramics on adhesive sticker (150*150mm)
--Sample:Available
--Materials:92% Al2O3 or 95% Al2O3
--Density:3.60 or 3.68
--Moh's:9 scale
--Application:Wear Resistant
--Finished ceramics size :120*120mm , 150*150mm, 300*300mm, 500*500mm on Nylon Net /silk back /paper back
--OEM/ODM:Acceptable
--HS Code:6909120000
2.Raw Material:
The wear resistance alumina ceramic products are made from the high purity, super fine and single narrow particle high-quality grain alumina powder, which is spray-dried processing, formed by cold isostatic pressing, firing on 1520ºC~1650 ºC temperature. Subject to Al2O3 content difference, we have 92%, 95%,abrasion resistance ceramics.
3.Advantage of the material:
---High hardness:
Its rockwell hardness is HRA80-90 and the Moh's hardness is up to 9 grade with is only less than diamond. And its abrasion-resistant is more better than steel and stainless steel;
Dimensions
ITEM NO. |
TYPE |
MAT SIZE (mm) |
CERAMIC TILE (mm) |
1 |
CERAMIC TILE MAT |
500 x 500 |
10X10X3 |
2 |
CERAMIC TILE MAT |
500 x 500 |
20X20X4 |
3 |
CERAMIC TILE MAT |
500 x 500 |
20X20X6 |
4 |
CERAMIC TILE MAT |
1125X300 |
10X30X3 |
ITEM NO. |
TYPE |
MESH SIZE |
CERAMIC HEX. TILE |
GAP BETWEEN EACH TILE |
|
|
LENGTH x WIDTH |
SIDE |
THICKNESS |
|
|
mm |
mm |
|
|
mm |
1 |
HEX TILE MESH |
150 x 150 |
6 |
1/8" |
(3mm) |
3 |
2 |
HEX TILE MESH |
150 x 150 |
12 |
1/8" |
(3mm) |
1 |
3 |
HEX TILE MESH |
150 x 150 |
12 |
1/4" |
(6mm) |
1 |
4 |
HEX TILE MESH |
150 x 150 |
12 |
3/8" |
(10mm) |
1 |
5 |
HEX TILE MESH |
150 x 150 |
12 |
1/2" |
(12mm) |
1 |
6 |
HEX TILE MESH |
300 x 300 |
12 |
1/8" |
(3mm) |
1 |
7 |
HEX TILE MESH |
300 x 300 |
12 |
1/4" |
(6mm) |
1 |
8 |
HEX TILE MESH |
300 x 300 |
12 |
3/8" |
(10mm) |
1 |
9 |
HEX TILE MESH |
300 x 300 |
12 |
1/2" |
(12mm) |
1 |
10 |
HEX TILE MESH |
500 x 500 |
12 |
1/8" |
(3mm) |
1 |
11 |
HEX TILE MESH |
500 x 500 |
12 |
1/4" |
(6mm) |
1 |
12 |
HEX TILE MESH |
500 x 500 |
12 |
3/8" |
(10mm) |
1 |
13 |
HEX TILE MESH |
500 x 500 |
12 |
1/2" |
(12mm) |
1 |
14 |
HEX TILE MESH |
500 x 500 |
12 |
1" |
(25mm) |
1 |