Chemshun High Fluid Flux Plastic Hi-flow Ring Packing for Tower Packing
Product Introduction:
Chemshun plastic hi-flow ring packing is developed on the basis of Pall ring structure, grid shaped open-hole tower packing, hi-flow ring packing opening rate is more than 50%, bed void rate is higher than the same specifications of Pall ring, therefore, polypropylene hi-flow ring packing has a higher fluid flux. Polypropylene hi-flow ring packing has 45% lower pressure drop per meter than Pall ring. The polypropylene hi-flow ring packing has better rigidity and strength because of the staggered arrangement of vertical frame sections and the reinforcement in the center of the ring.
Application:
Widely used in petroleum, chemical, chlor-alkali, natural gas, coking, waste gas treatment, water treatment and many other fields.
Feature:
-- High free volume
-- Low pressure drop
-- Low mass-transfer unit height
-- High flooding point
-- Uniform gas-liquid contact
-- Small specific gravity
-- High mass transfer
-- Efficiency
Specification:
| Product Name |
Plastic Hi-Flow Ring |
| Material |
PP,PE,PVC,CPVC,PVDF,etc |
| Life Span |
>3 years |
| Size |
Surface Area m2/m3 |
Void Volume |
Packing Density Kg/m3 |
| Inch |
mm |
| 1/2" |
16 |
260 |
91 |
80 |
| 1" |
25 |
210 |
92 |
79 |
| 1-1/2" |
38 |
140 |
94 |
58 |
| 2" |
50 |
100 |
94 |
54 |
| 3-1/2" |
90 |
73 |
96 |
33 |
Each product can be customized, a variety of products to meet your needs.
| Performace/Material |
PE |
PP |
RPP |
PVC |
CPVC |
PVDF |
| Density(g/cm3)(after injection molding) |
0.98 |
0.96 |
1.2 |
1.7 |
1.8 |
1.8 |
| Operation Temp(ºC) |
90 |
>100 |
>120 |
>60 |
>90 |
>150 |
| Chemical Corrosion Resistance |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
| Compression Strength(Mpa) |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
Service:
We accept custom orders.
If you want to know more product information, please feel free contact us and we'll afford you the most suitable product and best service!
){kind=link}